Dry casts

1 m2 plasterboard plate
4kg adhesive plaster
0,3 kg plaster
1,5 linear meter "bandage" tapes
high-tensile gypsum plaster for concrete wall

Wood-lathing of chemise

1 m2 plasterboard plate
2 lm wood lath-console
15pcs 3,5x25 wood-screws
0.3kg plaster
1.6 lm "bandage"

Chemise (for adjustable cleat)

1 m2 plasterboard plate
1 m2 mineral-/glass-wool insulation
2,4 adjustable clip
2 lm wood-lath or CD60 metal profile
1.3 lm UD30 profile + sponge tape (PAE tape)
13pcs 3.5x25 plasterboard screws
5 Opel screws
0.3 kg plaster
1.6 lm "bandage" tape
2.4 punch dowel

Partition wall on metal space structure with 2x1 layer plates

0.8 lm UW profile
2 lm CW profile
1.3 lm joining sponge tape (PAE tape)
1 m2 mineral-/glass-wool 5cm
2 m2 plasterboard plate minimum 12.5mm thick
26pcs 3.5x25 plasterboard screws
0.6 plaster
3.2 lm "bandage" tape
1.8 punch dowel 6/40
Aluminum guard bead

Partition wall on metal space structure with 2x2 layer plates

0.8 lm UW profile
2 lm CW profile
1.3 lm joining sponge tape (PAE tape)
1 m2 mineral-/glass-wool 5cm
4 m2 plasterboard plate minimum 12.5mm thick
26pcs 3.5x35 plasterboard screws
9pcs 3.5x25 plasterboard screws
0.9 kg plaster
3.2 lm "bandage" tape
1.8 punch dowel 6/40
Aluminum guard bead

Suspended ceiling lining on metal space structure

4 lm CD60 profile
20pcs 3.5x25 plasterboard plate
1.3 lm UD30 profile
1.3 kg plaster
1.6 lm "bandage" tape
1.6 rapid suspensions, vernier suspension for fire-retardant or loaded counter-ceiling
5,6 rectangular anchors or 3 cross-adjusters
1m2 plasterboard plate, min. 12.5 mm thick
1,6 db suspending wire with loop
1.3 m sponge tape, 30 mm (PAE tape)

Loft coverings for wooden backing

1 m2 plasterboard plate
20pcs 3.5x35 plasterboard screws
0.3 kg plaster
1.6 lm "bandage" tape
3 lm unilinear lath-backing
4 adjustable clips
12pcs 3.5x35 or 40 wood-screws
1 m2 foil (based on designer calculation)
1 m2 mineral-/glass-wool (minimum 16cm thick)
Aluminum guard bead

The exact requirements should be calculated based on the actual conditions!

The bill of materials is made without taking the cutting and other losses into account.